THE RAINBOW FISHING SYSTEM The Rainbow System can be ordered here: www.therainbow.co.uk The system includes: First Look Review The concept of the Rainbow Fishing System, which has been designed and manufactured in the UK, is that different colours represent different depths of water and hence different rigs. The Rainbow Depth Gauge contains a unique 4 metre tape that is divided into 12 sections, each section being a different colour. The first section is white and represents the first and shallowest depth, the second section is green and so on. There is a matching colour winder for each colour on the tape. Preparation: A rig (line, float, hook and shot) is setup for each colour and therefore for each depth. For example the first rig is measured to the same length as the ‘White Depth’ and is wound onto the ‘White Winder’. The second rig is measured for the ‘Green Depth’ is wound onto the ‘Green Winder’, and so on for each of the twelve colours and winders. Set up: The Rainbow is securely attached to the end of a fishing pole and is lowered into the water, at the spot to be measured, until the weighted tape finds the bottom. Using The Rainbow: The colour section on the tape at the water’s surface will be the colour of the winder to be used. That winder will have been pre-wound with the correct length of rig for that depth. Set down: When the fishing is finished for the day, the rig is re-wound onto the correct winder ready for use next time. The Rainbow System is described in much greater detail on the Rainbow website: www.therainbow.co.uk. | |||||||
|